These heavy-duty timers must be wired directly into an electrical service panel to control light systems (up to 1000 watts). Depending on electrical service, choose the 120v unit with four 10-amp receptacles, or the 240v unit with four 5-amp outlet receptacles. Each outlet is capable of powering up to 1000 watts of lighting equipment. |
|
| Green Air Products Lighting Timers 240VFour outlet receptacles each capable of powering up to 1000 watts of lighting equipment.
These time switches are designed to operate high load lighting equipment. It consists of a premium quality precision synchronous clock motor and a high amperage switching circuit. All Green Air Products controllers are housed in black anodized brush finish aluminum enclosures which can not break, chip or corrode.Operates with a maximum combined outlet switching capacity of 40 amps. Plug or wire the power cord into a receptacle capable of handling the maximum total combined amperage draw of your equipment load. Make certain that the receptacle, wiring and circuit breaker are adequate and properly suited for this application. Plug lighting equipment into outlet receptacles located on each side of controller. Turn clock dial to current time of day. AM and PM is indicated by colored ring on dial face. Push all trippers toward the center of the dial for "On" time and leave in the outward position for "Off" period. Timer has 96 non-detachable 15 minute on\off trippers. 240V |
|
2727 Lyndale Ave. S. Minneapolis, MN. 55408 Order Line: 1-800-498-4178 Office: 1-612-870-9077 Fax: 1-612-870-8901 [email protected] |